Forum Discussion

MZhao20's avatar
MZhao20
Icon for New Contributor rankNew Contributor
6 years ago

PS方式配置FPFA是否可以回读文件

在PS模式下，通过DSP对FPGA进行配置 .rbf 文件。在DSP端会报出“字符出错”之类的错误信息。现疑似 .rbf 文件写入异常，是否有方法可回读出FPGA中 .rbf 文件，进行对比？或者有其他解决方案？

1 Reply

  • CheepinC_altera's avatar
    CheepinC_altera
    Icon for Regular Contributor rankRegular Contributor
    6 years ago

    Hi,

    To ensure we are same page, would you mind to further elaborate on the following:

    1. Mind share with me the specific Quartus version, device and the DSP IP that you are using?

    2. Would you mind to share with me some screenshots with explanation on your issue observation to facilitate further understanding.

    3. If there is any simple design QAR, please feel free to share with me so that I can have a better understanding of your configuration.

    Please let me know if there is any concern. Thank you.

    Best regards,

    Chee Pin