Forum Discussion

lancewang's avatar
lancewang
Icon for New Contributor rankNew Contributor
2 years ago

Projects need to be re-flashed to take effect

After the FPGA is powered on, there will be bit errors when the project is first flashed to the FPGA, but after the same project is re-flashed, the bit errors disappear. Why is that? Do I need to modify any parameters？

Configuration

3 Replies

  • sstrell's avatar
    sstrell
    Icon for Super Contributor rankSuper Contributor
    2 years ago

    Can you clarify what you're doing? Are you talking about using the Quartus Programmer over JTAG or configuring from an on-board flash or something else? More details.

    And what is your indication of bit errors?

  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    11 months ago

    Hi lancewang,


    Any updates? Could you provide any screenshots of the error?


    Regards,

    Fakhrul


  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    11 months ago

    As we haven't received a response to our previous notification, this thread will be transitioned to community support. We hope all your concerns have been addressed. If you have any new questions, please feel free to open a new thread to receive support from Intel experts. Otherwise, community users will continue to assist you here. Thank you.