Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Programming the Cyclone V GT development board

I'm working with the Cyclone V GT development board and have not yet been able to configure the FPGA via Quartus II. I'm quite new to FPGA programming, but I should say that I've successfully prog...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Generally I will use Auto detect and then change file to add the SOF to the programmer. Some cases I will get into failure to program if I do not use Auto detect. Is your case pass if use Auto detect?