Programming support for EPC2LI20 with FLEX10k device

Question

I am trying to flash a .pof file onto a EPC2LI20 device, and the current version of Quartus II is no longer compatible with it. Is there a workaround to this through a third party software? I know Quartus II version 9.0 should work with it, but I don't know where I would go to download that software. Any assistance with either locating Quartus II or a third party software is much appreciated!

wz2 · Answer

Hi there,I'm sorry, but the EPC2 is too outdated and has already reached the end of its support life.QuartusII 13.0sp1 is the earliest version now still available online.This doc may can help u:  https://www.intel.com/content/dam/altera-www/global/en_US/pdfs/literature/pcn/adv2011.pdf​Best regards,wz

fvm · Answer

Hi,where do you see recent Quartus programmer being incompatible with EP2CL20? I have EP2CL20 .pof file from an old project and it's recognized in Quartus, e.g. 23.1. Unfortunately I have no target hardware at hand to check if the programmer can actually access EP2C.RegardsFrank

_ak6dn_ · Answer

Try this search:  https://archive.org/search?query=subject%3A%22quartus%22thru the internet archive. Several hits come up for Quartus II 9.x installs.

Forum Discussion

Programming support for EPC2LI20 with FLEX10k device

3 Replies

Recent Discussions

LTC Connector DE10-Standard FPGA

Request for Alternate Part Recommendation for EPCQ64ASI16N

CPRI F-Tile Dynamic Reconfiguration

Quartus Programmer detects Agilex 7 AGFA014R24B device as AGFA014R24A

Agilex 5 PWRMGT IO pin connections