Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Programming Issue with Active Serial Programming

We are trying to program a EP1C12Q240C8N device using Quartus II 6.0 Web on a Windows 7 PC with the Byte Blaster II programmer. Getting a cannot recognize silicon device ID error. The programming ope...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Assuming you want to Programm the Serial configuration EEPROM via active Serial programming, this device for sure cannot be detected as not being on the JTAG chain, thus there is no Silicon ID to be recognized...