Forum Discussion

dhw333's avatar
dhw333
Icon for New Contributor rankNew Contributor
3 years ago

program .jic file successfully but FPGA can't start by it.

The .sof file can program and work well,but the .jic file that in JTAG chain shows successful can't work. This PCB has been cured successfully before and can work normally.The only difference is th...
ak6dn's avatar
ak6dn
Icon for Regular Contributor rankRegular Contributor
3 years ago

You need to provide more specific info on your configuration and problem if you want any useful help.

What version of Quartus? What OS?

What do you mean by 'JTAG downloader has been replaced'?

What do you mean by '.jic file shows successful (but) can't work'?

dhw333's avatar
dhw333
Icon for New Contributor rankNew Contributor
3 years ago

THANKS for your reply.

Quartus 14.1,WINDOWS 10.

Compared to the previous successful download, only the JTAG downloader has been changed.

The process of the Programmer interface shows success. But restarting the power is still the old program.

Take another new PCB board with the same hardware and there will be no program.