Altera_Forum
Honored Contributor
Honored ContributorProgram cpld max v using ftdi ft4232
I am trying to program CPLD MAX V using FTDI FT4232 instead of a USB BLASTER.Any suggestions on how to proceed further are requested.
Forum Discussion
Altera_ForumHonored Contributor
Honored ContributorForget that idea and get yourself a USB Blaster.
The Quartus programmer does not support the FT4232 operating in JTAG mode. You would have to find (write) your own programming software. If money is a concern, there are cheaper clone versions of the USB Blaster available on the web, principally from Chinese sources.
