Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Problem with configuration EPC2 via Jtag

Hi! my problem is that i can't configure EPC2 via JTAG with USB-blaster with pof - file, but with jam or jbc it can be configured. Quartus says: "unexpected error code 44". Well, i insta...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hey! I configure eprom via USB-blaster and i don't use FPGA JTAG-pins! And what are you talking about active serial programming? Do you understand, that EPC2 can't be programmed in active serial mode?

Moreover, all i want to know is what does "error code 44" means!