Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Problem uploading design to Cylone II

Hi, i have the nios development board (cyclone II edition), which has an altera cyclone II EP2C35F672C6 FPGA. The problem i'm facing is that everytime i use the quartus 2 programmer to upl...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I was experiencing the same problem. I tried changing the unused pins setting under device settings to "inputs tri-stated" and it worked! Thanks!