Forum Discussion

KCole4's avatar
KCole4
Icon for New Contributor rankNew Contributor
6 years ago

Problem programming Cyclone 10 in PS Mode

I am not seeing the CONFIG_DONE signal go high from the Cyclone 10 FPGA when programming in PS mode from STM32 CPU. The nSTATUS pin toggles as expected after we toggle the nCONFIG pin, and does not...
KCole4's avatar
KCole4
Icon for New Contributor rankNew Contributor
6 years ago

Hi Alex - got it working by both slowing down the clock and clocking on the other edge. Will now go back and look closer at the signals...

Thanks for the help,

KC