Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Problem in sending a packet using ethernet MAC

Hi ...:) I integrated a custom MAC into my design. I transmitted a packet which I could see in the SignalTapII analyzer. But when I connected my NEEK board to another PC using crossover ethern...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi,

I could able to detect the PHY Cable and Speed 100Mbps.With my own Stack, its initiating a trasmission of a Packet, I could able to view the Txen ,Txdata[3:0] signals in Signal Tap II Analyzer, But I cant able to capture the data in Wireshark .

I havent set any timing constraints ,If you feel there are some timing Problem what are the timing constraints to be set ?