Post-solder cleaning recommendations for ARRIA-10, Cyclone-V and Cyclone-10 FBGA-s

Hi Svetlana,

Thank you for contacting Intel Community. You can refer to AN353 document which describes the board assembly process used in surface-mount technology (SMT) and focuses on the SMT component-to-board reflow soldering.

https://www.intel.com/content/dam/altera-www/global/en_US/pdfs/literature/an/an353.pdf

In general, the Intel FPGA is not recommended for washing.

Thank you

Regards,

Chia Ling