Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorPorting from Xilinx to Altera
Hi everybody, we just started with a new project which will use an Cyclone III. We ant to reuse as much of our previous code which was done for Xilinx FPGA. Most file are quite genric, but so...
Altera_ForumHonored Contributor
Honored ContributorHi,
Not sure if you have seen this attached document. But I have found this to be very useful as well when I was migrating from Xilinx to Altera(not design reuse though). Good Luck Binu
