Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

PLL and ADC in Max 10

hi all i have a problem to use the ADC in my design. the main clock in my design insert from Pin Number J16, when i'm trying to insert the ADC to my design i have to use also on PLL. during th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Not really. However, if you're able to add an external wire loop from an unused I/O pin to M8 (assuming M8 is not already used), then you can feed your clock from J16 out of the I/O pin and on into M8.

Cheers,

Alex