Pin Compatibility 5CGXFC7 5CGXFC9

Question

Dear Customer Service,

are the pins of 5CGXFC7 5CGXFC9 (both F23 package) compatible?
Means can the FPGAs be replaced without schematics redesign?
I tried to find out by pin file compare.
I also know about the pin planner migration option - but it seems that the feature only works for a completed (not for a future) project.
But I'm still not sure about compatibility.
Does anybody know?

Regards

ash_r_intel · Answer

Hi,The Quartus Prime software helps to plan migration of the design to a different density device in the same family. You should indicate that to the software early in your design by selecting devices that are available for migration (Assignments -&gt; Device -&gt; Migration Devices). The tool then allocates pins to the design which are common in the migratable device.More resources below:https://www.intel.com/content/www/us/en/docs/programmable/683475/19-4/device-migration-planning.htmlhttps://www.intel.com/content/www/us/en/docs/programmable/683143/22-1/migrating-assignments-to-another-target.htmlRegards

Forum Discussion

Pin Compatibility 5CGXFC7 5CGXFC9

1 Reply

Recent Discussions

Bidirectional pin USB_RX with a pseudo-differential I/O standard must use the OEIN port of the node

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required

Inquiry regarding purchasing FPGA licenses

Cyclone 10 LP's Extended Industrial parts

Agilex 7 F/I Series True Differential Input Termination