Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Pin Assignment for Custom Component in SOPC

I am working on DE3 board with Stratic III device on it. I have successfully written a piece of verilog code which deserializes the LVDS data coming from HSTC port (an external ADC ic connected to HS...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

At present the "conduit interface" serves only one purpose. That is it export signals outside the SoPC system. So, you create a conduit interface and assign all the signals you want to bring out of the SoPC system to it with a signal type of "export".

Jake