PCI ExpressのnPERST(pin_perst, PERST#)ピンに4.7k Ohmのpull-up処理は必要ですか？

Hi Gripen,

Which FPGA device are you referring for the nPERST pin? Typically the nPERST pin does not require any 4.7kohm pull up as long it is driven with 3.3V. Please check the respective FPGA Pin Connection Guidelines from the link below:

https://www.intel.com/content/www/us/en/programmable/documentation/lit-dpcg.html

Regards,

Nooraini