Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

nStatus unconnected on cyc1

Hi, I have a design which the nStatus pin is not connected to pull up. This situation is probably the reason that i cant configure the FPGA in AS mode. But, when can configure the FPG...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Thank you FvM for the answers.

I'll try to connect the nStatus pin, because there is no guarantee that it will work always in JTAG or PS mode (the specification are not talking about the option of leaving it unconnected)