Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

nStatus unconnected on cyc1

Hi, I have a design which the nStatus pin is not connected to pull up. This situation is probably the reason that i cant configure the FPGA in AS mode. But, when can configure the FPG...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

First of all thanks for the quick reply.

I already saw figure 13-19 which describes the connection. nevertheless, although nstatus need to be connected to 10KE pull up resistor, I have no problem to configure the FPGA without this connection.

So my question is:

Can I use it without nstatus connected to pull up ?

or

what are the condition that will allow me to pass on this connection?

thanks

P.S : JTAG names tDI, tDO, tCK, TMS