Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

nStatus unconnected on cyc1

Hi, I have a design which the nStatus pin is not connected to pull up. This situation is probably the reason that i cant configure the FPGA in AS mode. But, when can configure the FPG...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

How about reading the device handbook? Figure 13–16 jtag configuration of single cyclone fpga is exactly showing the minimal circuit requirements. Optional connections are discussed in the accompanying text.

P.S.: The JTAG signals are not named Di, Do, Dclk, by the way.