Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

NIOSII Reg

Hello to all, I am using Altera DE2 Board. When adding SRAM in SOPC Builder of quartus there is an error saying that "SRAM should be connected to avalon memory mapped tri-state master." How ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Thank you for your reply. This is very helpful for us. Now my total sopc system is executed correctly. But In niosII IDE window while running time i got this message:

Using cable "USB-Blaster [USB-0]", device 1, instance 0x00

Pausing target processor: OK

Initializing CPU cache (if present)

OK

Downloading 00100000 ( 0%)

Downloaded 53KB in 2.4s (22.0KB/s)

Verifying 00100000 ( 0%)

Verify failed between address 0x100000 and 0x10D177

Leaving target processor paused