Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

NIOS2 IDE problem

Hi everybody, I have this code error when i try to run any application. --- Quote Start --- Using cable "USB-Blaster [USB-0]", device 1, instance 0x00 Pausing target processor: OK ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I resolved the problem by connecting the system ID to the second CPU.

Now my questions are :

1 - why in altera multiprocessor example we connect only one CPU ?

2 - in my SOPC design cpu_tse is not connected to jtag_uart, so it's possible to connect it or no?