Forum Discussion

Occasional Contributor

2 years ago

Nios Processor System ID and System Timestamp Mismatch Error

Hello everyone, I'm currently working on a Arria ii gx project involving the Nios processor and I've run into an issue with System ID and System timestamp mismatch errors. I've been unable to find ...

Configuration

EBERLAZARE_I_Intel

Regular Contributor

2 years ago

Hi,

It seems more than just sysid error, was there any error in Quartus or Nios SBT during compilation?

Could you share your design for me to quick check?

Also, you could port this design in to your board and have a quick test:

https://www.intel.com/content/www/us/en/design-example/714861/max-10-nios-ii-qsys-hello-world-lab.html

nome
Occasional Contributor
2 years ago
Hello
Thanks for your reply
I used hello world example i changed quartus window to Linux even i changed board but expected sysid base address not found all our cases i am using quartus 18.1
today hope i will share here my project qpr

Thanks
best regards
nome
nome
Occasional Contributor
2 years ago
Hello
My issue has been resolved in platform design I missed to set nios_cpu_reset debug with all IP reset

Thanks
best regards
nome

Forum Discussion

Nios Processor System ID and System Timestamp Mismatch Error

Recent Discussions

Avalon-ST configuration with Agilex 3 fails

Cyclone IV E – PLL Power Track Width Recommendation Clarification

Operating temperature for 10M08DCF256A7G

System PLL of Agliex5 PCIE example design cannot be locked after configuration

Download links not working