Forum Discussion

WvanH1's avatar
WvanH1
Icon for New Contributor rankNew Contributor
6 years ago

NIOS II QSPI boot for Cyclone 10 GX

We are using the Cyclone 10CX220Y device with a Nios II CPU in our design, and want to boot it from QSPI (device MT25QU512). So far, we are able to only start the .sof file from QSPI at power on, an...
Ahmed_H_Intel1's avatar
Ahmed_H_Intel1
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Here is the design I've created on CV SoC Kit

Later I will share with you the steps required to program a flash using jic file