Forum Discussion

WvanH1's avatar
WvanH1
Icon for New Contributor rankNew Contributor
6 years ago

NIOS II QSPI boot for Cyclone 10 GX

We are using the Cyclone 10CX220Y device with a Nios II CPU in our design, and want to boot it from QSPI (device MT25QU512). So far, we are able to only start the .sof file from QSPI at power on, an...
Ahmed_H_Intel1's avatar
Ahmed_H_Intel1
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi,

This is incorrect:

What I understand that you need to program the QSPI flash with the SOF and HEX so you will boot the NIOS from there (you can copy the code or execute in place "XIP"). I have a CV soc Kit and created an example to show you how to set the BSP and how to program the QSPI flash via jic file "JTAG Indirect Configuration"

The example is an execute in place "XIP".

Please check the attachment and let me know:

Regards,