Forum Discussion

New Contributor

6 years ago

NIOS II booting from a serial flash device

I want to keep my design on an EPCQ 256 flash device which includes NIOS. What are the correct setting for BSP to boot from serial flash device. I cannot find this any where. Is there any example des...

AnandRaj_S_Intel

Regular Contributor

6 years ago

Hi,

Refer

Boot Configuration Options session: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/nios2/edh_ed51002.pdf

Table 2. Summary of Nios II Processor BSP Settings

https://www.intel.com/content/www/us/en/programmable/documentation/lro1432739743862.html

AN458

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an458.pdf

Regards

Anand

Forum Discussion

NIOS II booting from a serial flash device

Recent Discussions

Cyclone 10 GX development board collaterals

Agilex 7 FPGA Availability on Cloud Platforms (AWS, Azure, GCP)?

AGRW027R28A2I2V Thermal Model

Why does PTA show zero W for F-tiles in Hierarchical Design Editor

Arria 10: Remote Update Factory Fallback won't work & Watchdog does not trigger