Forum Discussion

DBarn22's avatar
DBarn22
Icon for New Contributor rankNew Contributor
4 years ago

NIOS Code not running from compressed internal Flash

I have a FPGA design in Quartus Prime 18.1, including a NIOS II processor. The original design used a 10M25DAF and I could program the design to internal Flash and it would run the code on power u...
DBarn22's avatar
DBarn22
Icon for New Contributor rankNew Contributor
4 years ago

Addendum:

I have returned to basics. Still with Compressed image I have tried the following.

1) Simple hello world. Generated a simple bare metal Hello World application, that prints a counting result. Programmed this into flash. Rebooted. This runs on start up.
2) MicroCOS hello world. Multi-task Hello World example. Prints counting number. This also runs from flash on start up.
3) Simple Socket Server example. Standard example. tse_my_system changed to match my FPGA. LED stuff removed. Fixed IP, hard coded MAC.
Everything seems to program okay, but the app does not run.