Nios & ARM multiprocessor system

Question

Hello,

I am interested in working with Arria V for both: ARM and Nios (on the same fpga)

I have found the following link which describes how to use multi Nios processor on same fpga.

https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/hb/nios2/n2sw_nii52015.pdf

(https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/hb/nios2/n2sw_nii52015.pdf)I would like to ask if it relevant also when using ARM and Nios together.

Thank you for any assistance on start point with software on ARM & Nios system.

Ran

altera_forum · Answer

Yes, you can absolutely use Nios II and ARM Hard Processor System for your system design in Aria 5, and integrate using Qsys. There's some information here- ftp://ftp.altera.com/up/pub/altera_material/13.1/computer_systems/de1-soc/de1-soc_computer.pdf. For reference, here is a design example too-https://cloud.altera.com/devstore/platform/15.0.0/hps-to-nios-ii-based-fpga-warm-reset-design-example/

Forum Discussion

Nios & ARM multiprocessor system

1 Reply

Recent Discussions

HDMI example design errors with Agilex 7

MAX10 RSU upgrade succeeds, but device boots Factory image instead of Application

Vcm for the clock input pins of agilex5 E-series FPGA A5ED065BB32AE5SR0

carry chain tdc

Does the Post-Configuration BSDL Generator for Cyclone 10 LP require an NDA?