Forum Discussion

SLitc1's avatar
SLitc1
Icon for New Contributor rankNew Contributor
6 years ago

Need RMA#'s for 7 FPGS - ALL HAVE FAILURE TO GROUND PROBLEMS 5SGXEABH40C2NGA - 1 PIECE 10AS066N3F40E2SG - 6 PIECE

Zawani_M_Intel's avatar
Zawani_M_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Dear Sharon,

Please tell me the story of this part, how you discovered it have failure to ground?How the it was measured, and such as that. Also, did you observe a functional failure in the operation of the devices?

* Each case must ONLY have one OPN.

Wani

  • SLitc1's avatar
    SLitc1
    Icon for New Contributor rankNew Contributor
    6 years ago
    Good Morning, Lets start with these 4 first: 10AS066N3F40E2SG - 4 parts with date code 1913 failed at testing scan. Rework activities (x-ray, reflow) showed no faults in the solder application. Replaced all 4 parts with new ones and all 4 boards passed. Suspect faulty FPGA's. Regards, Sharon Litchfield Quality Engineer Benchmark Electronics, Inc. 100 Innovative Way Nashua, NH 03062 ph. 603-879-7066
  • SLitc1's avatar
    SLitc1
    Icon for New Contributor rankNew Contributor
    6 years ago
    Good Morning, Additional returns: 10AS066N3F40E2SG - 2 parts with date code 1901 failed at test scan, both have v-core P1V8 shorted to gnd. 5SGXEABH40C2NGA - 1 part with date code 1849 failed test scan, TP52 to GND short. Regards, Sharon Litchfield Quality Engineer Benchmark Electronics, Inc. 100 Innovative Way Nashua, NH 03062 ph. 603-879-7066