Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorMy 1st MAX 10 design
Well, I can't hide that I'm a bit scared. This is my 1st FPGA design and I'm doing it without having the MAX 10 here to test first. I know that I might be asking too much :) but do you guys see an...
Altera_ForumHonored Contributor
Honored ContributorThis document is a useful checklist for new designs:
https://www.altera.com/en_us/pdfs/literature/dp/max-10/pcg-01018.pdf (https://www.altera.com/en_us/pdfs/literature/dp/max-10/pcg-01018.pdf) CONFIG_SEL can be safely ignored (just used as another I/O) on the small devices with only one configuration. nCONFIG must however be pulled or tied high - forgot that one in my earlier post.
