Forum Discussion

Gerard's avatar
Gerard
Icon for New Contributor rankNew Contributor
5 years ago

Multiple problems with PEF7071

Hello, We are using the PEF7071 (as an RGMII) with an FPGA in a custom pcb designed here. We've run in some problems that didn't happen when testing the FPGA firmware with the Cyclone 10 LP Develop...
AlfredoS_Intel's avatar
AlfredoS_Intel
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi Gerard,

Thank you for posting in our Intel® Ethernet Communities Page.

Since your issue is regarding the , we need to route this thread to the correct group so you will be better assisted by the proper team.

Please wait for their reply within 1 to 2 business days.



Best Regards,

Alfred S

Intel® Customer Support


  • Gerard's avatar
    Gerard
    Icon for New Contributor rankNew Contributor
    5 years ago

    The RGMII is still not working but I solved the MDIO problem.

    The MDIO Interruption pin was set as an input not an output in the FPGA, once this has been solved the MDIO is working again.

    Now I'll keep working on the RGMII itself, I'll post an update if I find something about it.