Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

migration from EPCQ to EPCQ-A

Hi, on a custom board we have successfully used an altera Cyclone V (5CEBA2) with an EPCQ32 (ASx4). Now we had to migrate from the EPCQ32 to the EPCQ32A. We used Quartus Prime Lite 17.1.0 a...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

Hi,

I use an Arria V and replaced an EPCS128 with EPCQ128A - same issue: it programs/verifies fine via JTAG/.jic but configuration fails. I posted a thread yesterday but no response so far. So frustrating. And production is halted.