Forum Discussion

Gigiz's avatar
Gigiz
Icon for New Contributor rankNew Contributor
5 years ago

MAX10M04 / Quartus Prime Lite Edition

Good morning, I'm completing a project with MAX10M04 FPGA and Quartus Prime 20.1 Lite Edition software. The project is in the final phase, everything works fine but I have a very strange problem: I...
Nurina's avatar
Nurina
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi Gigi,

We did not receive any response to the previous answer that I have provided, thus I will put this case to close pending. Please post a response in the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you with your follow-up questions.

Regards,
Nurina

PS: If you find any comment from the community or Intel Support to be helpful, feel free to give Kudos.

Gigiz's avatar
Gigiz
Icon for New Contributor rankNew Contributor
5 years ago

Hi Nurina,

Sorry, what is your previous answer ?

I have not made deep test as you suggestion me, I need time ...

The problem is very strange, I solve it if I disconnect two signals and connect the input block directly to groud (as attached picture).

Best Regards,

Gigi