Forum Discussion

New Contributor

6 years ago

MAX10 programming problem

Hello! I am trying to program my max10 device I tried to program with .sof through Quartus programmer 18 and it went well, both verilog and nios part worked. But when I try .pof I got: Info (2090...

Ahmed_H_Intel1

Frequent Contributor

6 years ago

Here are some examples:

https://fpgacloud.intel.com/devstore/platform/16.1.0/Standard/dual-boot-design-example-max10-de10-lite/

https://fpgacloud.intel.com/devstore/platform/16.1.0/Standard/max10-remote-system-upgrade-rsu-over-uart-for-nios-ii-processor/

https://fpgacloud.intel.com/devstore/platform/16.0.0/Standard/sdram-nios-test-max10-de10-lite/

Regards,

Forum Discussion

MAX10 programming problem

Recent Discussions

Agilex 5 Power

Agilex 5 Sulfur Partial Write Issue on F2H ACE‑Lite I/F (256‑bit) with AXI Master of 128‑bit

Cyclone 10 LP's Extended Industrial parts

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required

Quartus Pro simulation libraries for Riviera Pro