Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

MAX10: JTAG sharing not working -- how to erase fw-image?

Hi, target MAX10: 10M02SCU169 Quartus: 15.1 I was trying to use JTAG sharing on MAX10 so I checked "enable JTAG sharing" and unchecked "enable nCONFIG, nSTATUS, CONF_DONE" and generated ...
MV's avatar
MV
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

I just run into the same trap.

Shut down the power, shorted nSTATUS pun to GND, powered-up, erased the Altera chip through JTAG (USB Blaster), released the pin (which has 10k pull-up on my PCBA) and all works again.