Forum Discussion

sparky's avatar
sparky
Icon for New Contributor rankNew Contributor
5 years ago

MAX10 JTAG inaccessible after programming

Hi, I'm working with a MAX10M04 and am having some programming issues. The programmer always reports "(failed)" in the progress bar when programming is complete and no further JTAG access is possi...
sparky's avatar
sparky
Icon for New Contributor rankNew Contributor
5 years ago

No need for feedback on this one now. Problem solved.

It was something obvious. There was a solder bridge between TDO and the adjacent i/o pin on the MAX10.