Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Max10 E144 I/O Assignment - Need clarify re. adjacent pins and cross-coupling

Hi, Section 3.9 of the MAX 10 General Purpose I/O User Guide states the following, re. the E144 parts: "There is strong inductive coupling on the MAX 10 E144 lead frame package. Glitch m...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

I should have mentioned that the discussion in the Max10 UG referenced above, focuses on signals coming into the FPGA. I am assuming similar cross-talk can occur when the FPGA is driving output signals at max drive strength. If this is not the case, please clarify. Thanks again.