Forum Discussion

FrankK's avatar
FrankK
Icon for New Contributor rankNew Contributor
2 years ago

MAX10 - Stress limit characterization

Hello,

what is the tolerated stress limit in [mA] and [time duration] for port pin Vref of (single supply) MAX10 device (10MxxSA) considering the following scenario?

(Vref > Vcc_one) and (Vref < 3.3V) for t < x ms

Assuming a power-up sequence, in which Vref might startup ahead of Vcc_one.

MAX10 datasheet, ADC user and connection guideline doesn’t provide and data about stress limits.

Thanks in advance.

Power

5 Replies

  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,


    I also might not know if we have or not the information, but as far as I know, we do have only the absolute maximum ratings for the DC output current per pin, the DC input voltage and also the absolute maximum ratings for the supply voltage pin for single supply device.


    • FrankK's avatar
      FrankK
      Icon for New Contributor rankNew Contributor
      2 years ago

      Hi,

      thanks for your reply. I'm aware about the specified max. ratings, given by the datasheet but still looking for values about above described stress limits.
      Can you forward my query to your design centre experts?

  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    As we do not receive any response from you on the previous question/reply/answer that we have provided, please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.


  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,


    I tried to ask around regarding the stress limits, but I could not find any information.

    However, the first scenario (Vref > VCC_ONE) is not allowed per table 34 of the datasheet. It shows the maximum voltage allowed on VREF is VCC_ONE, with a minimal voltage of VCC_ONE - 0.5V.

    When operating within these specifications, ADC_VREF will only consume 10uA of leakage current (table 11).


    I afraid this is out of Intel specification provided.


    Reference:


    https://www.intel.com/content/www/us/en/docs/programmable/683794/current/single-supply-devices-adc-performance.html


    https://www.intel.com/content/www/us/en/docs/programmable/683794/current/i-o-pin-leakage-current.html


    Regards,

    Aqid


  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    As we do not receive any response from you on the previous question/reply/answer that we have provided, please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.