Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Max II CPLD design failing at low temperatures

I have a design that uses an industrial temperature Max II (EPM2210GF256I5). The design is very simple. It does some serial pass-through at 115,200 baud and some at a higher rate (16 x 64kHz). The ma...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi,

typical behaviour if your design is not FULLY synchronous :D

Hope this help.