Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

MAX 10 10M25SAE144 problem boot from internal flash

Hi, I created a simple bitstream to blink an LED. It works fine when I download the SOF through JTAG and the LED blinks. But after I programmed the POF to the internal flash, the LED didn't blink aft...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi Anand, I measured nCONFIG V = 3.22V, same as CONF_DONE.

I tried to create a JIC file but it seems MAX 10 doesn't have Active Serial configuration for the internal flash.

Since the PCB is for pre-production sorry my boss doesn't allow me to attach it here.

Best regards, SV.