Forum Discussion

GirishCiena's avatar
GirishCiena
Icon for New Contributor rankNew Contributor
4 years ago

Macronix NOR Flash not worked on power up with Cyclone 5

I am using the Macronix NOR Flash(MX25L12872FM2I-10G) with Cyclone 5 just to store some configurations required during power on the system. Previously I am using Micron NOR flash. The reason behind n...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi, i think the approach is incorrect already as you were selecting EPCQ during JIC creation. You need to select the exact flash device part number / create custom flash device part (if the flash part number is not available in the selection) in convert programming file. Since the micron part number you provided is not tested or supported.

https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-guidance/configuration-support.html#intel-config-devices


I would suggest you to create RPD and use our customized programmer to program it:

https://www.intel.com/content/www/us/en/docs/programmable/683271/current/customizable-flash-programmer-overview.html