Forum Discussion

IDeyn's avatar
IDeyn
Icon for Contributor rankContributor
4 years ago

Macronix configuration device failed to work with Cyclone V

Hi all! I have a custom board with Cyclone V (5CEBA4), and we decided to use Macronix configuration device (MX25L25645) for external configuration storage. As it could be seen here , Macroni...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi Ivan,


Thanks for your reply. Can you let me know how do you generate JIC file? And are you programming with Quartus Programmer? If so, what version?


Also, during configuration, can you check the pin AS_DATA, DCLK, nSTATUS & nCS?


Regards,

Bruce


IDeyn's avatar
IDeyn
Icon for Contributor rankContributor
4 years ago

Hi Bruce!

Sorry for a delay with an answer.

As about jic file generation - Using Convert Programming file -> Configuration Device (MX25L256) ; Mode (Active Serial) .

Quartus Programmer version 20.1.

Right now I prepare screenshots with pins activity. I will post them in a few days.

--

Best regards,

Ivan