Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

JTAG contacts problem

Good afternoon, members of the forum. I have a used card with a Stratix V chip. For a long time I could not get connected by jtag. I decided to use a multimeter to measure the contacts from t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi,

Not possible through firmware because it is having dedicated pins & function.It can be only done through hardware design.

For correcting it you required hardware change.

You can design a adapter with help of dot-matrix board and BergStik connectors with stack-up arrangements and use.

Best Regards,

Anand Raj Shankar

(This message was posted on behalf of Intel Corporation)