Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

JTAG chain

My board has an Atmel SAM4L MCU as well as the Altera MAX 10 (10M02) FPGA. I'm programming both via JTAG. Will there be any problems if I place those 2 chips in the same JTAG chain, so they can share...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Oh that's good to know.

But in this case, do I have to use the USB Blaster to program the MAX 10, and then use the Atmel ICE (Atmel's JTAG programmer) to program the SAM4L? Or are those programmers all standard and the same programmer can program all JTAG devices in the chain?