Forum Discussion

JayHarikumaran's avatar
JayHarikumaran
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

JAM player out of memory error

Hi, I am working on a board with a DSP and an FPGA. Earlier we had a MAX II CPLD which we upgrade to a MAX10. The image file is much larger and when we run the JAM player to program the FPGA from...
JayHarikumaran's avatar
JayHarikumaran
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

The error code was 1 which stands for out of memory. Our setup is with a MAX 10 device 10M08SCU169A7G.
It is possible for us to increase the static buffer sizes but the original buffer sizes were set by the code from Intel (Altera)

Is it at all possible to use JAM player to update the firmware on MAX10 devices?