Forum Discussion

JayHarikumaran's avatar
JayHarikumaran
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

JAM Player exit code 10 Device Programming Failure

Hello, We have ported the JAM player onto an embedded processor. I can see the status is JBIC_SUCESS but the exit code says Device programming Failure. The FPGA is a MAX10 (10M08SC169I7G) device a...
  • JayHarikumaran's avatar
    JayHarikumaran
    Icon for Occasional Contributor rankOccasional Contributor
    4 years ago

    Hi Aiman,

    I had seen that post. It is different from our setup. In that setup the JAM player is split between pc and the micro. In our case, the entire JAM player is running from the micro.

    Regards

    Jay