Forum Discussion

mwf's avatar
mwf
Icon for New Contributor rankNew Contributor
3 years ago

Issue with updating ARIA 10 PCIe core to 20_1_1

We are migrating to a new hardware design server and are converting existing FPGA designs from Quartus 17.1 to Quartus 22.3. We have a number of PCIe Gen 3 x 8 designs that build without issue and ru...
Wincent_Altera's avatar
Wincent_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi,


Did you means all work okay and only one is fail ?

Can you check the dip switch and please ensure all return to default as per mention in the user guide.


Get back to me your finding.


Regards,

Wei Chuan


  • mwf's avatar
    mwf
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hi Wei.

    On the Gen 2 x 8 design 7 out of 11 builds fail to run correctly on the hardware.

    On the Gen 3 x 8 design all 11 builds run correctly on the hardware.

    Just to reiterate the same board was used to test all builds.

    This is our own hardware design so it doesn't have a dip switch. I am not sure what you want me to check.

    Thanks,

    Mike