Forum Discussion

TNaka61's avatar
TNaka61
Icon for New Contributor rankNew Contributor
6 years ago

Is "Cyclone 10 LP" slower than "Cyclone IV E" ?

I tested according to the same source code (VHDL) shown below. The reported delay was almost the same... but "Cyclone 10 LP" gave the following timing error @300MHz clock. Is my setting incomplete...
KennyT_altera's avatar
KennyT_altera
Icon for Super Contributor rankSuper Contributor
6 years ago

I just recall somethings, can you go to timing analyzer and screenshot both delay out for comparison? I remember there are extra delay (like hmc delay stuff) and there is a workaround/avoid on this.