Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

Interfacing of Cyclone V GX starter kit with AFE5809EVM

I'm new to Altera devices and i am working on a project to interface AFE5809EVM with cyclone V GX starter kit using the HSMC-ADC-Bridge connector. Does anyone has any knowledge about how to do it. Pl...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
7 years ago

--- Quote Start ---

Hi,

I had asked for FPGA output side to convert to single-ended.

Refer http://www.farnell.com/datasheets/2099782.pdf

http://www.ti.com/lit/ds/symlink/afe5809.pdf

Best Regards,

Anand Raj Shankar

(This message was posted on behalf of Intel Corporation)

--- Quote End ---

Hi,

Are the pin out of the HSMC in the Cyclone V GX Starter kit Schematics right? It does not match with the schematic of the HSMC-ADC-Bridge. Can you please assure it.

Also it would be great if you can help me in pin planning of these LVDS signals from HSMC-ADC-Bridge.

Regards,

Nimish