Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

install Quartus-lite is 64-bit softwar and will not work on the 32-bit platform Linux

Hello everyone! I've been working the last week to FPGA programming software. I really new on this. There are some version to run the Quartus-lite to 32-bit platform on linux? When I download the mentioned software and run the message "installing Quartus-lite 16.1.0 is 64-bit software and will not work on the 32-bit platform. I'm using Debian8.

Thanks in advanced.

2 Replies

  • JSmit233's avatar
    JSmit233
    Icon for New Contributor rankNew Contributor
    6 years ago

    The Intel Quartus Prime Lite design tools version 16.0 supports the following device families: Arria II, Cyclone 10 LP, Cyclone IV, Cyclone V, MAX II, MAX V, and MAX 10 FPGAs. This lite edition does not require the purchase of a license and fully supports the Cyclone IV FPGA used on the Gecko4-Education boards. The software package includes the Mentor Graphics ModelSIM 10.6d (Intel Starter Edition), a multi-language HDL simulation environment.

    Download Source

    The software can be downloaded for Windows and Linux from the Intel FPGA Software Download Center. The download may require the creation of a free My Intel account.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    9 years ago

    --- Quote Start ---

    Hello everyone! I've been working the last week to FPGA programming software. I really new on this. There are some version to run the Quartus-lite to 32-bit platform on linux? When I download the mentioned software and run the message "installing Quartus-lite 16.1.0 is 64-bit software and will not work on the 32-bit platform. I'm using Debian8.

    Thanks in advanced.

    --- Quote End ---

    Checking youtube videos, I installed Quartus II Web Edition 13.0, all process was OK ,

    Thanks